How to make a timed quiz online — and what actually stops cheating

Setting a time limit on a quiz takes a minute; making it hold is about where the clock lives. Step-by-step setup, whole-quiz vs per-question limits, which builders have a timer (Google Forms, Microsoft Forms, Typeform, Jotform, Tally, Fillout), and what no timer can stop.

We build ClarNow, one of the builders in the table

Most timed quizzes on the web are a countdown the page draws for the respondent. That is fine for a pub quiz. For a test where the score matters, it is a number the person taking it can change.

This post covers how to make a timed quiz online, which of the common form builders can do it at all, and — the part the how-to guides leave out — where the clock actually lives, because that decides whether the limit holds. There is an interactive demo in the middle where you can try the usual tricks on both kinds of timer and see what each one records.

The short answer

  1. Pick a tool with a built-in time limit, not a countdown bolted on top. Of the popular builders, Microsoft Forms and ClarNow have one; Jotform has a countdown widget; Google Forms, Tally and Typeform have none of their own (details and sources).
  2. Decide between a limit on the whole quiz, on each question, or both. Whole-quiz for exams, per-question for recall and speed.
  3. Decide what a late answer is worth — refused, kept and flagged, or kept and scored 0. Late answers happen honestly too: a phone locks, a train goes into a tunnel.
  4. Test it the way a respondent would try to beat it: change the device clock, reload, and submit late. It takes two minutes and tells you more than any feature page.

How to make a timed quiz, step by step

The steps below are for ClarNow, because it is the tool we can describe screen by screen. The decisions in them are the same in any builder.

1. Write the questions, or start from a template

Create a form of type Quiz and add questions with correct answers and points. If you would rather edit than start from nothing, the Timed exam template comes with a 5-minute limit and 30 seconds a question already set, and the trivia template has 20 seconds a question.

2. Set a limit on the whole quiz

In Settings → Quiz, switch on Time limit and enter minutes and seconds — anything from 30 seconds to 3 hours. The clock starts when the first question appears, not on the welcome screen, so reading the instructions doesn't cost anyone time. When it reaches zero, the answers given so far are submitted automatically.

3. Add limits to single questions, if you want them

Each question's Settings has its own Time limit, from 5 seconds to 10 minutes. At zero the answer as it stands is kept and the quiz moves on — there is no going back to that question. Per-question limits work with or without a limit on the whole quiz.

4. Choose what late answers are worth

Under Late submissions, choose Mark as late (the response keeps its score and is flagged "Over time" with how far over it went) or Score as 0 (kept and flagged, no points). A question answered past its own limit scores 0 either way. Nothing is refused, so a genuine connection problem never costs someone their answers — you see what happened and decide.

5. Publish and take it yourself

Take it once on your phone and once on a laptop, and run the three tests below. Or take ours — this is the live timed-exam demo, with 5 minutes in total and 30 seconds a question:

A real published quiz on clar.now. Starting it starts its clock, so your attempt is recorded like anyone else's.

A limit on the whole quiz, or on each question?

They stop different things, which is why it is worth being deliberate rather than picking whichever the tool puts first.

  • Whole-quiz limit — the respondent manages their own time: they can spend four minutes on a hard question and rush the easy ones. That is how most exams work, and it is the right shape for a certification check, a course test or a job-application assessment. Its weakness is that it leaves time to look things up on the easy questions.
  • Per-question limit — every question gets the same short window and no spare time accumulates. It suits trivia, vocabulary and flash-card drills, and anything where searching for the answer is the cheat you care about. It feels harsher, so keep the window generous enough to read the question twice: 20–30 seconds for a one-line multiple-choice question is a common starting point, not a rule.
  • Both — a per-question window inside an overall cap. Useful when a few questions deserve longer than the rest.

Where the clock lives decides whether it holds

Every timer you see on a quiz is drawn by the respondent's browser. The question is what that countdown is measured against.

A timer that only lives in the page remembers when the attempt started and what the deadline is, and compares them to the device clock. All three of those are in the respondent's hands: the clock is in their system settings, the deadline is a number in a page they can edit with the browser's developer tools, and the start time is whatever the page stored — which a reload or a cleared site data can wipe.

A timer the server checks records the start on the server when the first question opens, and judges the submit against the server's own clock. The page still draws a countdown, but the countdown is only a display. Change the clock or the deadline and the screen may say the wrong thing; the response is still marked late. That is how ClarNow's timer works: the start time is recorded once per attempt, a reload gets the real deadline back, and each timed question's answer is locked on the server the moment it is given, so looking at the feedback and changing the answer afterwards changes nothing.

Try it on both:

Interactive

Try to beat a 60-second quiz

Both clocks started at the same moment. Use the tricks below, skip ahead, then submit and see what each kind of timer records. A simulation — nothing is sent anywhere.

Timer in the page only 1:00 left on screen
Timer checked by the server 1:00 left on screen
Real time since start: 0 s
What each trick does to each kind of timer
Trick Timer in the page only Timer checked by the server
Set the device clock back Gains the time. The countdown is worked out from a clock the respondent controls. Gains nothing. The server has its own clock and checks the submit against it.
Edit the deadline in dev tools Gains the time. The deadline is a number in the page, and the page is theirs. Gains nothing. The page’s copy of the deadline is only for display.
Reload the page Often restarts the clock, unless the page saved its start time — also somewhere the respondent can clear. Picks up where it was. The start time was recorded on the server when the first question opened.

One detail the demo includes on purpose: the server allows 15 seconds of slack on a quiz deadline (5 on a question) before calling a submit late, because a submit sent at 0:00 on a slow connection arrives after it. A timer with no slack at all punishes bad signal rather than cheating.

Which form builders have a timer

Read from each vendor's own help centre, feature page or support forum on 26 September 2026. Where the documentation is silent, the table says so rather than guessing. It records what each tool offers, not how its clock is enforced — we did not test that on anyone else's product, and the next section is how you can.

Quiz time limits in popular form builders, read on 26 September 2026
Builder Limit on the whole quiz Limit per question When time is up Source
Google Forms Not built in — third-party add-ons only Not built in Depends on the add-on Google: Create & grade quizzesForm Timer add-on
Microsoft Forms Built in, set in minutes Not documented Auto-submits; the timer can’t be paused Microsoft: Set a timer for forms or quizzes
Typeform Not available — “Time to complete” is only an estimate shown on the welcome screen Not available — Typeform community, staff answerTypeform: Time to complete
Jotform Global Countdown widget No per-question widget (support answer) Auto-submits, or blocks submitting until the time is up — your choice Jotform: Global Countdown widgetJotform support on per-question timers
Tally Not built in — close on a date or a response limit only Not built in — Tally: Features
Fillout Not documented — the quiz guide covers scoring and feedback, no timer Not documented — Fillout: Make a quiz
ClarNow (ours) Built in, 30 seconds to 3 hours Built in, 5 seconds to 10 minutes — with or without a quiz limit Auto-submits; late answers kept and marked, or scored 0 — your choice ClarNow: Quizzes and scoring

A few things the table can't hold. Typeform's "Time to complete" shows an estimate on the welcome screen; it does not limit anything, and Typeform's community staff confirm there is no timer. Microsoft's help page says answers are submitted automatically when time is up and that the timer can't be paused. Jotform's Global Countdown can either submit the form at zero or stop it being submitted before the time is up — the second is for "spend at least ten minutes on this", not for a time limit. And Google's locked mode, often mentioned in the same breath, stops students opening other tabs on school-managed Chromebooks; it does not add a time limit.

Three tests to run on any timer

Feature pages say "timer". These tell you what kind. Start an attempt on a published quiz with a short limit and try each one:

  1. Move the clock. With the quiz open, set your device's time back ten minutes. If the countdown jumps up and a submit well past the real limit is accepted as on time, the timer trusts the device.
  2. Reload. Halfway through, reload the page — and then open the same link in a private window. If the countdown starts from the top in the same browser, the start time lived in the page. (A fresh clock in the private window is expected: that is a new attempt.)
  3. Submit late. Put the laptop to sleep or switch a phone to airplane mode, wait past the limit, then submit. See what the owner side records: nothing, an on-time response, or a late one with the overrun on it.

What a timer can't do — ours included

A server-checked timer closes the clock tricks. It does not make a quiz cheat-proof, and it is worth being precise about what is left:

  • Retakes in a private window. A timer limits an attempt, not a person. On a quiz open to anyone with the link, a private window is a new attempt with a new clock — and ClarNow has no one-attempt-per-person option today: no sign-in for respondents, no unique link per person. If a respondent can see their score and try again, some will. Google Forms (Limit to 1 response) and Microsoft Forms (One response per person) can, by making respondents sign in — for a classroom where everyone has a school account, that is a real reason to pick them over us.
  • A second device. Nothing in a browser stops someone searching on their phone. A per-question limit makes it slower; it does not make it impossible.
  • Someone else taking it. The timer knows an attempt started, not who is at the keyboard.
  • Sharing the questions. A quiz that stays open for a week is a quiz whose questions can be passed around for a week. A closing date and a response limit — both available in ClarNow's access settings — shrink that window.

For a pub quiz, a training check-in or a product-knowledge quiz for your own team, a server-checked limit plus a closing date is plenty, and better than most of what is out there.

Questions people ask

How do I make a timed quiz online for free?

Use a quiz builder with a built-in time limit rather than a countdown add-on. In ClarNow, make a Quiz form (or start from the Timed exam template), open Settings → Quiz, switch on Time limit and set minutes and seconds; per-question limits are under each question's Settings. Both are on the free plan, which includes 100 responses a month. Microsoft Forms also has a built-in quiz timer. Google Forms, Tally and Typeform have none of their own as of 26 September 2026.

Does Google Forms have a timer?

No. Google's own help page on creating quizzes in Google Forms describes no time limit (read on 26 September 2026). A timer on a Google Form comes from a third-party add-on from the Google Workspace Marketplace, and how well it holds up depends on that add-on — one of them, Form Timer, says its server-side checks against refreshing and reopening tabs are part of its paid plan. Google's locked mode stops students opening other tabs, but only on school-managed Chromebooks, and it does not add a time limit.

Can students cheat a timer by changing the clock on their computer?

Only if the timer trusts the computer. A countdown that works out the remaining time from the device's clock can be stretched by setting that clock back, editing the deadline in the browser's developer tools, or sometimes just reloading. A timer whose start time is recorded on the server, and which checks the submit against the server's clock, can't be: the screen may show the wrong number, but the response is still marked late.

Should I set a time limit on the whole quiz or on each question?

A whole-quiz limit suits tests where people should be able to skip, come back and manage their own time — an exam, a certification check. A per-question limit suits recall and speed — trivia, flash-card drills, anything where looking the answer up is the cheat you care about, because it leaves no spare time to look. You can combine them: 30 seconds a question inside a 5-minute quiz.

What happens to answers submitted after the time runs out?

It depends on the tool. Microsoft Forms and Jotform's Global Countdown widget submit automatically at zero. ClarNow also submits automatically, and when a late submit still arrives — a phone that put the tab to sleep, say — it keeps it and either marks it "Over time" with its score or marks it and scores it 0, whichever the quiz owner chose. It allows 15 seconds of network delay before calling a submit late.

Does a timer stop people retaking the quiz?

No. A timer limits one attempt, not one person. If the quiz is open to anyone with the link, a respondent can start a fresh attempt in a private window with a fresh clock. Stopping that needs identity. Google Forms (Limit to 1 response) and Microsoft Forms (One response per person) can hold respondents to one attempt by making them sign in, and both can restrict a quiz to your organisation; ClarNow has no sign-in for respondents today, so it can't.

Does a timer stop people looking answers up?

Only indirectly. A tight per-question limit leaves little time to search, but nothing in a browser stops someone using a second device or asking a friend. If the result matters — a hiring test, an exam that counts toward a grade — a time limit is one layer, and proctoring, locked-down devices or an in-person setting are the others.

If you want to try the setup described here, ClarNow's free plan has quiz scoring and both kinds of time limit, and the quizzes page covers the rest of what the quiz builder does.

Builder features read from each vendor's own documentation on 26 September 2026; they change, so check before you rely on one. Found a mistake? Tell us and we will correct it and date the correction.

Time limits the server checks, on the free plan.

A limit on the whole quiz, on single questions, or both — with late answers kept and flagged. 100 responses a month, no card.